[RF] Move sub-config classes to their own directory

AquaMai/TouchSensitivity/Config.cs

@@ -0,0 +1,72 @@
+using AquaMai.Attributes;
+
+namespace AquaMai.TouchSensitivity;
+
+public class Config
+{
+    [ConfigComment(
+        en: """
+            Enable custom sensitivity
+            When enabled, the settings in Test mode will not take effect
+            When disabled, the settings in Test mode can still be used
+            """,
+        zh: """
+            是否启用自定义灵敏度
+            这里启用之后 Test 里的就不再起作用了
+            这里禁用之后就还是可以用 Test 里的调
+            """)]
+    public bool Enable { get; set; }
+
+    [ConfigComment(
+        en: """
+            Sensitivity adjustments in Test mode are not linear
+            Default sensitivity in area A: 90, 80, 70, 60, 50, 40, 30, 26, 23, 20, 10
+            Default sensitivity in other areas: 70, 60, 50, 40, 30, 20, 15, 10, 5, 1, 1
+            A setting of 0 in Test mode corresponds to 40, 20 here, -5 corresponds to 90, 70, +5 corresponds to 10, 1
+            The higher the number in Test mode, the lower the number here, resulting in higher sensitivity for official machines
+            For ADX, the sensitivity is reversed, so the higher the number here, the higher the sensitivity
+            """,
+        zh: """
+            在 Test 模式下调整的灵敏度不是线性的
+            A 区默认灵敏度 90, 80, 70, 60, 50, 40, 30, 26, 23, 20, 10
+            其他区域默认灵敏度 70, 60, 50, 40, 30, 20, 15, 10, 5, 1, 1
+            Test 里设置的 0 对应的是 40, 20 这一档，-5 是 90, 70，+5 是 10, 1
+            Test 里的数字越大，这里的数字越小，对于官机来说，灵敏度更大
+            而 ADX 的灵敏度是反的，所以对于 ADX，这里的数字越大，灵敏度越大
+            """)]
+    public byte A1 { get; set; } = 40;
+
+    public byte A2 { get; set; } = 40;
+    public byte A3 { get; set; } = 40;
+    public byte A4 { get; set; } = 40;
+    public byte A5 { get; set; } = 40;
+    public byte A6 { get; set; } = 40;
+    public byte A7 { get; set; } = 40;
+    public byte A8 { get; set; } = 40;
+    public byte B1 { get; set; } = 20;
+    public byte B2 { get; set; } = 20;
+    public byte B3 { get; set; } = 20;
+    public byte B4 { get; set; } = 20;
+    public byte B5 { get; set; } = 20;
+    public byte B6 { get; set; } = 20;
+    public byte B7 { get; set; } = 20;
+    public byte B8 { get; set; } = 20;
+    public byte C1 { get; set; } = 20;
+    public byte C2 { get; set; } = 20;
+    public byte D1 { get; set; } = 20;
+    public byte D2 { get; set; } = 20;
+    public byte D3 { get; set; } = 20;
+    public byte D4 { get; set; } = 20;
+    public byte D5 { get; set; } = 20;
+    public byte D6 { get; set; } = 20;
+    public byte D7 { get; set; } = 20;
+    public byte D8 { get; set; } = 20;
+    public byte E1 { get; set; } = 20;
+    public byte E2 { get; set; } = 20;
+    public byte E3 { get; set; } = 20;
+    public byte E4 { get; set; } = 20;
+    public byte E5 { get; set; } = 20;
+    public byte E6 { get; set; } = 20;
+    public byte E7 { get; set; } = 20;
+    public byte E8 { get; set; } = 20;
+}